Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Metals and Materials International - The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500...     

高精度薄壁钢套类零件制造工艺

薄壁钢套类零件是机械制造中常碰到的一类难加工零件,由于其不同的功能用途和典型结构特点,其制造有一定难度,在实际生产过程中,经常出现加工制造后的零件尺寸精度、形状精度、形位精度达不到使用及设计要求。本文较系统地阐述了薄壁钢套类零件的典型制造工艺方法以及在制造过程中的变形分析和应对措施。     

薄板坯连铸连轧流程专利分析

以Orbit专利分析平台为主要研究工具，从专利文献中抽取专利数量指标和专利质量指标来构建评价薄板坯连铸连轧技术竞争力和企业创新能力的指标体系，结合其他文献研究的成果，从产业发展的实际出发做出分析，系统揭示了自薄板坯连铸连轧技术开发以来的技术进步、专利布局、发展演化、国内外发展现状、技术竞争实力等，有助于在专利文献提供的线索启发下开发新产品、新技术，从而有效提高研发效率。     

Densification mechanism during reactive hot pressing of B4C-ZrO2 mixtures

The densification behaviors of pure B₄C and B₄C-ZrO₂ mixtures were compared during hot pressing. The results showed that in-situ formed ZrB₂ effectively enhanced the densification process of B₄C-ZrO₂ mixtures, more significantly during the intermediate stage. Within the relative density ranging from 0.75 to 0.90, the B₄C-15?wt%ZrO₂ mixture (B15Z) achieved the maximum densification rate as twice much as that of pure B₄C. The stress exponent n>3 indicated plastic deformation was the dominant densification mechanism of B15Z. The viscosities of plastic flow were evaluated using Murray-Rodger-William equation and the viscosity of B15Z was only a quarter of that in pure B₄C. The sintering activation energy was calculated to be 305.9?kJ/mol for pure B₄C and 197?kJ/mol for B15Z, respectively. It was proposed that the lower viscosity of plastic flow and activation energy accelerated the sliding and propagating motions of plastic flow, by which underlain the enhanced densification behaviors of B₄C-ZrO₂ mixtures.     

Effect of hydrogen in advanced high strength steel materials

The effect of hydrogen in AHSS material (automobile and structural component) was discussed. Dual Phase steels were highly susceptible to hydrogen-related failure when working on hydrogen environment. The influence of hydrogen on TRIP steel was seen during fractographic examination where the brittle transgranular fracture was presented. TWIP steels results were inconsistent. The mechanisms which were responsible for crack growth are discussed. LIST and SSRT testing were performed for mechanical properties evaluation and SEM and TEM were used for microstructural examination of fractured samples. Simultaneous preventing methods to reduce hydrogen embrittlement such as coating, alloying and providing diffusion layer were discussed.     

球团矿-冶金矿山企业的新"蓝海"——国内冶金矿山企业球团矿开发的研究和探讨

随着国内外铁矿石市场竞争的日趋激烈和全球钢铁业从高速增长向平稳增长转折,国内冶金矿山企业科学发展面临着新的抉择;球团矿应用市场的广阔,使之成为国内冶金矿山企业价值创新的新＂蓝海＂.     

宝钢不锈带钢酸洗工艺及废水处理

以宝钢为例,对不同材质的热、冷轧不锈钢带钢提出酸洗工艺流程和设计参数,概述不锈钢各种酸洗方法的酸洗机理,介绍不锈钢酸洗后的废水处理方法。     

Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding

The objective of this study is to develop a hot diffusion-compression bonding process for cladding low carbon steel (LCS) to high chromium cast iron (HCCI) in solid-state. The influence of temperature (950–1150 °C) and strain rate (0.001–1 s⁻¹) on microstructure, hardness and bond strength of the HCCI/LCS bimetal were investigated. The interface microstructure reveals that the unbonded region can only be found for 950 °C due to lack of diffusion, while the intergrowth between the constituent metals occurred at and above 1100 °C. When bonding temperature increases to 1150 °C, a carbide-free zone was observed near the interface on the HCCI layer, and the thickness of the zone decreases with an increase of bonding strain rate. These evolutions indicate that the bond quality was improved by raising temperature and reducing strain rate due to the increase of element diffusion. The hot compression process of the bonding treatment not only changes the carbide orientation of the HCCI, but also increases the volume fraction of Cr–carbide. Based on the microstructural examinations and mechanical tests, the optimum bonding temperature and bonding strain rate are determined to be 1150 °C and 0.001 s⁻¹, respectively.     

430m~3高炉中心加焦技术生产实践

对八钢430m3高炉在中心加焦过程中应该注意的问题及得到的效果进行了一些实践对比研究,通过中心加焦技术,能够达到炉况稳顺、增产降耗,确保高炉长寿。     

GPS技术下的露天矿山爆破设计及布孔

针对某露天铁矿布孔方式及弊端，该矿山引进GPS技术并将其应用到矿山爆破设计和布孔中，在现场进行实验研究。结果表明，使用了GPS技术进行布孔，可以极大地提高孔位的布设精度，且操作简便，工作效率较之前也有较大的提高，满足了矿山精细化爆破要求，使得最终的爆破效果得到改善。据现场统计，最终爆破大块率降低40%，减少了处理大块等待时间，满足露天矿山采装的要求，获得了良好的经济效益。